How to Install a Home Accents WIDESPAN 36" Extension
By Regalo Baby | Published: 2026-10-28
Category: How-to Guides
Learn how to install the Home Accents WIDESPAN 36" Extension on your Regalo gate. Step-by-step guidance, compatibility checks, and mounting tips for a secure fit.
Quick Answer
To install the Home Accents WIDESPAN 36" Extension, first confirm your gate is Model #1176, then attach the extension's odd and even panels to the gate's side using the provided hardware. Follow the steps below for a secure, gap-free fit.
Why Compatibility Matters
The Home Accents WIDESPAN 36" Extension (Model #0076) is designed specifically for the Home Accents WIDESPAN Safety Gate (Model #1176). Using it with a different gate may result in an unstable fit or leave gaps that compromise safety.
This extension comes in a 2-pack with an attached odd and even extension, allowing you to widen your gate setup flexibly. Always check your gate's model number before purchasing or installing.
What to Expect During Installation
Installation typically takes about 10 minutes and requires no special tools—just the hardware included with the extension. The extension attaches to the side of your gate, extending its width by 36 inches.
Because the extension is designed to work as a pair, you can attach one or both panels depending on your doorway width. Plan the placement so the extension is on the side that gives you the most convenient access.
Step-by-Step Installation
- Confirm Compatibility: Check that your gate is Model #1176 (Home Accents WIDESPAN Safety Gate). Look for the model number on the gate's label or packaging. If it doesn't match, stop—the extension won't fit securely. A common mistake is assuming all WIDESPAN gates are the same; always verify the model.
- Gather Tools and Hardware: You'll need the extension panels and the included screws and brackets. Keep a screwdriver handy (though most hardware can be tightened by hand). Lay out all parts on a flat surface. Check that you have all four mounting screws before starting to avoid mid-install delays.
- Position the Extension: Hold the extension against the side of your gate where you want to widen it. Align the extension's edge with the gate's frame so there is no gap. The odd and even panels can be used together or separately. If the doorway is narrower than the combined width, use only one panel to avoid an oversized fit.
- Attach the Extension: Insert the screws through the pre-drilled holes on the extension into the gate frame. Tighten them securely but avoid over-tightening, which could strip the holes. If your gate has a pressure-mount system, ensure the extension doesn't interfere with the tension mechanism. A loose screw is a common issue—test the extension by gently pulling on it after tightening.
- Test the Gate and Extension: Open and close the gate several times to ensure the extension doesn't obstruct movement. Check that the gate locks properly and that there are no gaps larger than a finger width between the extension and the wall or gate. If the gate doesn't close smoothly, reposition the extension slightly and re-tighten.
Product Facts
- Home Accents WIDESPAN® 36" Extension - Black: Model #0076 36" W x 28" H Home Accents WIDESPAN® 36" Extension - Black is ONLY compatible with Model #1176 - Home Accents WIDESPAN® Safety Gate. This ensures a secure, gap-free fit when widening your gate—using it with a different gate could create safety hazards.
Home Accents WIDESPAN® 36" Extension - Black
