How to Install a Double Door Super Wide 24" Extension

Quick answer

To install the Double Door Super Wide 24" Extension, first confirm it is compatible with your Model #1348 gate, then attach the two extension panels to either side of the gate using the included hardware, ensuring the even and odd panels are positioned correctly.

Step-by-step installation

1. 1. Confirm compatibility and gather tools: Ensure your gate is Model #1348. You will need a Phillips screwdriver, a drill (for drywall anchors), a level, and a measuring tape. Check that the extension panels match your gate color. Common mistake: Trying to install on an incompatible gate. Always verify the model number first.
2. 2. Position the extension panels: Hold the even extension panel against one side of the gate opening and the odd panel against the opposite side. Use a level to make sure they are vertical. Mark the screw hole locations on the wall or door frame with a pencil. Checkpoint: Ensure the panels are level and aligned with the gate before drilling.
3. 3. Drill pilot holes and insert anchors: If mounting into drywall, drill pilot holes at the marked locations and insert wall anchors. For wood or metal frames, you can skip the anchors. Use a drill bit slightly smaller than the anchor size. Common mistake: Skipping anchors in drywall can cause the extension to pull out over time.
4. 4. Attach the extension panels: Align the extension panel brackets with the pilot holes and secure them with screws. Tighten until snug but do not overtighten. Repeat for the other panel. Checkpoint: Do not overtighten screws into drywall anchors as this can strip the anchor.
5. 5. Connect the gate to the extensions: Attach the Double Door Super Wide gate to the extension panels using the gate's existing mounting brackets. Ensure the gate latches securely and there are no gaps between the gate and extensions. Common mistake: Forgetting to check the latch alignment. The gate should close and lock smoothly without forcing.
6. 6. Test the installation: Apply firm pressure to the gate in both directions to confirm it is stable. Open and close the gate several times to ensure smooth operation. Adjust if necessary. Final checkpoint: If the gate wobbles or doesn't latch properly, recheck the extension panel alignment and screw tightness.

Product facts

• Double Door Super Wide® 24" Extension - White: Model #1300 24" W x 28" T Double Door Super Wide 24" Extension - White is ONLY compatible with Model #1348 - Double Door Super Wide Baby Gate and Play Yard. Ensures you don't buy the wrong extension for your gate, preventing installation issues and potential safety risks.

  

• Double Door Super Wide® 24" Extension - White: This is a 2-pack extension with one even and one odd extension. The two panels are designed to attach to opposite sides of the gate, so you must keep track of which is which during installation.